All units share ECM motors with 0-10Vdc proportional control, low water temperature cut-out (LTC), a connection box (CCB) for remote-mounted controls, tamperproof access fasteners and a textured white RAL 9010 finish. Design basis across the project: Air on 15°C, Water 80/60°C, 230V single phase.

Classroom — Belgravia Classic BEL60 (x1)

• Floor-mounted, extended case (BS-RAF EXT)
• RT1 remote thermostat and RS123R switchplate for local control
• Special height plinth
• Heating output: 4.3–7.6 kW across three speed settings

Dining Room — Belgravia Classic BEL60 (x1)

• High wall-mounted, extended case (HS-RAF EXT)
• RT1 remote thermostat and RS123R switchplate for local control
• Heating output: 4.3–7.6 kW across three speed settings

Main Hall — Belgravia Classic BEL60 (x3) and BEL150 (x2)

• BEL60 units high wall-mounted (HS-RAF EXT), one master unit controlling two slave units
• BEL150 units floor-mounted (J-RAF) with special height plinth and loose grille assemblies, one master unit controlling one slave unit
• Heating output: 4.3–7.6 kW per BEL60 unit; 9.9–15 kW per BEL150 unit

Stage — Belgravia Classic BEL60 (x2)

• Floor-mounted, extended case (BS-RAF EXT), special height plinth
• One master unit controlling one slave unit
• Heating output: 4.3–7.6 kW per unit

Gym Hall B6 — Belgravia Classic BEL150 (x4)

• High wall-mounted (HS-RAF)
• Configured as two master/slave pairs, each master fitted with RT1 thermostat and RS123R switchplate
• Heating output: 9.9–15 kW per unit

The completed installation provides Treviglas Academy with 13 Belgravia Classic fan convectors across five areas of the school, each sized and controlled to suit the specific demands of the space it serves. The zoned master/slave configuration allows staff to control heating in the classroom, dining room, main hall, stage and gym hall independently, supporting comfortable conditions for students and staff across the site. The project was delivered by mechanical contractor Totus Engineering Ltd.